, , , , , ,

Plastic Material for Molding Parts

Acrylonitrile butadiene styrene – (ABS) injection molding

What is ABS?

ABS is an opaque thermoplastic amorphous polymer comprised of three monomers; this makes it an excellent engineering material.

ABS material properties

ABS injection molding has great chemical and thermal stability along with toughness and strength properties. The surface finish after molding is high glass making it perfect for cosmetic applications.

ABS common applications

 ABS plastic injection molding material is a great all-round engineering plastic and can be found in wall sockets, automotive trim, printers, vacuum cleaners, hard hats, kitchen utensils, plastic toys, and musical instruments to name a few.

Poly oxy methylene – (POM) injection molding – Often call acetal

What is POM?

Poly oxy methylene, often acetal, is one of the key engineering plastic. Among plastic element, it is one by the most crystalline structure.

POM injection molding material properties

POM is a high strength, low friction engineering plastic that has excellent wear properties in both wet and dry environments. Easy to machine, acetal makes on outstanding choice for applications that require complex, light tolerances.  

POM common applications

Can be found in small gear wheels, eyeglass frames, ball bearings, ski bindings, fasteners, guns, knife, handles, and lock system. The element is widely accepted in the automotive and customer electronics industry.

Nylon 6 & 6-6 polyamide – (PA6 & PA66) injection molding

What is PA6 & PA66 ?

Nylon (PA) 6 & 66 are both plastic polymers called polyamides, most utmost nylons, including 6 & 66, are semi-crystalline and treat good power and durability for demanding applications.

PA material properties

Nylon injection molding material has high mechanical strength, stiffness, hardness and toughness good fatigue resistance, good sliding properties and wears resistance, good machinability characteristics.

PA common application

Can be found in sleeves and bearings, wear pads, hammer heads, gear wheels, seal rings, cutting boards, marine cleats to name a few.

Polycarbonate – (PC) injection molding

What is a PC?

Polycarbonate (PC) plastics area naturally transports amorphous thermoplastic.

PC material properties

PC is a great when impact resistance and/or transparency are a product requirement (e.g. in bullet – proof glass)

PC common applications

PC is usually used for plastic lenses in eyewear, in medicinal devices, automotive elements, protective gear, greenhouse, digital disks (CDs, DVDs and Blu – ray) and exterior lighting accessories.

Polypropylene – (PP) injection molding

What is PP?

Polypropylene (PP) is a thermoplastic “increasing polymer” obtain from the combination of propylene monomers.

PP injection molding material properties

Some of the most significant properties of PP are good chemical resistance, elasticity and toughness, fatigue resistance, good insulation, good impact resistance. PP is one of the most used plastic in the world today.

PP common application

One of the main characteristics of PP is that it can be molded into a living hinge due to its good fatigue resistance. Other applications include food packaging consumer products, car bumpers, toys, container taps.

Polybutylene terephthalate – (PBT) injection molding

What is PBT?

Polybutylene terephthalate (PBT) is semi-crystalline, white or off-white polyester similar in both compositions and properties to polyethylene terephthalate (PET)

PBT injection molding material properties

Resists abrasion temperature moisture effective electrical barrier with superb impact strength Subject to failure if noticed under stress Difficult to mold to extremely tight tolerances

PBT common application

PBT is usually used for food processing machinery purposes when low dampness absorption, resistance to staining or resistance to washing chemicals is required. It can also be found in electronic parts, electronic parts, and auto parts & TV set accessories.

Polymethyl methacrylate – (PMMA) injection molding

What is PMMA?

PMMA or acrylic is a transport thermoplastic homopolymer known more commonly by the trade name “Plexiglas”

PMMA injection molding material properties

PMMA or acrylic is extensively used transparent plastic. it is a tough plastic, easy to shape and a great alternative to the high cost less resilient glass.

PMMA common applications

Its applications in many markets from car windows, smartphone screens to aquariums. Other uses include lenses, acrylic nails, paint, security barriers, medical devices, LCD screens, and furniture.

/by
, , , , , , , , , , ,

Mold Manufacturer China

HYX Mould as a a profession mold manufacturer China company was keeping on researching and developing on plastic mold tooling during the past 11 years mould making. One R&D team with 11 people who are professional in various mould structures and have more than 10 years’ mould design and manufacturing experiences.

  • Mould researching:

During the past 11 years, HYX mould successfully did the researching of below mentioned mould making points.
How to make the hot runner housing on the mould accurate?
How to quick avoid the deforming of the mould plate after rough milling?
How to make the high speed thin-wall mould?
How to make gas aided PC injection molding mould?
How to make in mould labeling by normal plastic label?
How to inspect the different plastic parts? By working out many different types of plastic parts’ standard inspection data.

injection mold china
injection mold china
  • Mould Developing:

HYX Mould have gained the fruitful achievements of mould service and tooling ranges’ developing:

  • PVC FITTING DIA.32mm collapsible core system mould

 Succeed in providing collapsible core mould (the minimum diameter of this industry) with a fine solution and prolonging the mould’s working life. Offer customers a great scientific support in producing collapsible core pipe fitting mould.

Bi-injection mould meets the new requirements of the plastic industry. Its product ranges from car lamp, commodities, children toy and airline tableware, etc. In order to meet customers’ different needs, HYX has specially developed double color mould with different structures, including double color mould with rotary mould structure and hot runner double color injection mould.

  • 120 Cavity PET Preform Mould

For realizing multi cavity and high efficiency, HYX Packaging Mould Company has specially developed 120 cavity PET preform mould and hot runner valve gate system. Through robot cooling system out of mould, it increases the PET preform mould’s production rate. Equipped with Dakumar PET preform special machinery, it realizes an efficient production line integrated with mould, injection machine and robot, and fulfills the special needs of many beverage packaging companies.

  • 48 Cavity Medical PET testing Tube Mould
  • 4 Cavity Crate Mould

With breakthrough thinking and continuous development, crate mould has become one of the distinctive moulds in HYX. In 2007, HYX has firstly developed 2 cavity crate mould in the industry, and obtained customers’ satisfactory feedback. In two years, HYX mould has continuously exported over 20 sets of 2 cavity high speed mould with copper-beryllium. At the end of 2008, HYX Holdings Group’s R&D department has made a new breakthrough. 4 cavity crate mould with copper-beryllium has been carried out. Thus, one set of crate mould can produce 11,520 products per day, and the output has increased 8 times comparing to the common 1 cavity mould.

  • IML System

IML solution is carried out by branches of HYX Holdings Group. With the coordination of IML Mould, High Speed Injection Moulding Machine, Valve Gate Hot Runner System and High Speed IML Robot, the fastest production rate comes to 4.5 seconds per shot for 1 L ice cream bucket, and can produce barrel-shaped thin wall product with 16 cavities. This technologyl has achieved the Nr.1 in China, and taken the leading place in the world.
During these years R&D, as the mould maker, we found that researching can make a mould manufacturer optimize the mould structure to improve the mould quality. As because there is no mould design is the best, we only can make it better.

Recent innovation:
Plastic mould maker, Plastic mould manufacturer, moldmanufacturer China, plastic molding manufacturing, plastic injection molding service

What to know more information please click here to know more

/by